#	EN: English	v35	R0	western
$ "Messages"
$ "MsgId", "FormatStr"
1, "ECU"
2, "ZM"
3, "MCP"
4, "PRG"
5, "SND"
6, "FR"
7, "FP"
8, "STA"
9, "AV1"
10, "AV2"
11, "GRP"
12, "STANDALONE"
13, "NETWORKED"
14, "REPEATER"
15, "MCPW"
16, "No error"
17, "Software exception"
18, "System overload"
19, "Object not found"
20, "Object already exists"
21, "Load config failed"
22, "Config session not opened"
23, "Config session already open"
24, "Config file not found"
25, "Change not allowed"
26, "Operation not allowed"
27, "USB device removal failed"
28, "Invalid access code"
29, "Save config failed"
30, "Invalid TCP/IP address"
31, "Invalid date & time"
32, "Invalid time"
33, "Invalid password"
34, "Password confirmation failed"
35, "Event log  unavailable"
36, "Invalid field value"
37, "No devices detected"
38, "More than one device detected"
39, "Invalid investigation time"
40, "Installation data not found"
41, "Invalid CMS IP address"
42, "ALL for PANEL not allowed"
43, "Invalid DNS address"
44, "Invalid SNTP address"
45, "Device not allowed"
46, "Press RESET to complete"
47, "Date_T"
48, "Device"
49, "FR DLY"
50, "Control"
51, "Fr"
52, "Battery"
53, "Earth"
54, "Current"
55, "New"
56, "Confirm"
57, "Mo/Tu"
58, "Night"
59, "Day"
60, "OpMode"
61, "Output"
62, "OpMode"
63, "ID"
64, "Sa/Su"
65, "SND DLY"
66, "Su"
67, "Th"
68, "Tu"
69, "We/Th"
70, "Zone"
71, "Class"
72, "Type"
73, "Mode"
74, "Level"
75, "IP"
76, "Mask"
77, "Gateway"
78, "Port"
79, "OpMode"
80, "Input"
81, "MAC"
82, "Host"
83, "Alarm"
84, "Fault"
85, "Cond"
86, "Group_n"
87, "Version"
88, "Rev"
89, "Val%01d"
90, "Max"
91, "Min"
92, "Avg"
93, "Alarm"
94, "PreAl"
95, "FP DLY"
96, "CIT/ACT"
97, "Area"
98, "Active"
99, "Delay"
100, "Wrn_Dly"
101, "InvTime"
102, "InvMode"
103, "FR_Ext"
104, "WrnTime"
105, "SdSilDT"
106, "Alarm1"
107, "Alarm2"
108, "Time"
109, "Log"
110, "Mains"
111, "Supply"
112, "User"
113, "Passwrd"
114, "Evac_T"
115, "Test_T"
116, "Wrn_T"
117, "UKSB_T"
118, "First_D"
119, "Last_D"
120, "Manual"
121, "UKSB"
122, "Panel"
123, "Element"
124, "PnSilen"
125, "Global"
126, "Act_dly"
127, "Base"
128, "R (ohm)"
129, "T (C)"
130, "AVF"
131, "Instal"
132, "Address"
133, "Channel"
134, "Volume"
135, "Bank"
136, "Used"
137, "Zone/Pt"
138, "ZnCoinc"
139, "Enabled"
140, "BeepTst"
141, "TestH"
142, "ReportH"
143, "WrnT_4E"
144, "NWEvent"
145, "RportMd"
146, "StatCh"
147, "PulseT"
148, "Contin."
149, "CCode"
150, "Line1"
151, "Line2"
152, "Retries"
153, "Ext_ack"
154, "KissOff"
155, "Period "
156, "Fails"
157, "Pin"
158, "Apn"
159, "PSTN"
160, "IP/Port"
161, "Account"
162, "Receiv."
163, "Line"
164, "Dial_n"
165, "IP"
166, "AbrtMCP"
167, "DisInp"
168, "DoorMon"
169, "GasFlow"
170, "HoldMCP"
171, "StrtMCP"
172, "Manual"
173, "PrsrSw"
174, "OptRel"
175, "ActSND"
176, "RelSND"
177, "Actuat"
178, "Network"
179, "FR_ERM"
180, "FR_tst"
181, "No_ACK"
182, "H_Act"
183, "Actuat2"
184, "Isolate"
185, "EXTNode"
186, "FBA-CH"
187, "BaudR"
188, "Feature"
189, "act_grp"
190, "Cont"
191, "VinCond"
192, "Vin1"
193, "Vin2"
194, "NClosed"
195, "Report"
196, "Direct"
197, "DNS"
198, "Drift"
199, "SNTP"
200, "Dlight"
201, "Up_Netw"
202, "T_Zone"
203, "Up_Time"
204, "V_Load"
205, "V_Charg"
206, "C_Charg"
207, "ProdCod"
208, "ProgCod"
209, "Npollut"
210, "Protoc"
211, "InitPan"
212, "Manufac"
213, "Approv"
214, "Val"
215, "Warn_L"
216, "Radio"
217, "E_Heat"
218, "T_Grad"
219, "Al_Dly"
220, "Inv_Ack"
221, "Timeout"
222, "Disable"
223, "Event"
224, "Site"
225, "Backup"
226, "Primary"
227, "Discard"
228, "Save"
229, "Apply"
230, "Enter"
231, "Next"
232, "Backspace"
233, "Search"
234, "Main menu"
235, "Show events"
236, "Language"
237, "Logout"
238, "Exit"
239, "Back"
240, "Dis / Enable"
241, "Support"
242, "All/Disabled"
243, "Backup"
244, "Remove USB"
245, "Devices"
246, "Faults"
247, "Delete"
248, "Switch value"
249, "Clear device"
250, "Clear all"
251, "Disabled"
252, "In test"
253, "All"
254, "In alarm"
255, "Wizards"
256, "Reboot"
257, "Ind Test"
258, "New"
259, "Backspace"
260, "Refresh"
261, "Continue"
262, "Retry"
263, "Register"
264, "Unregister"
265, "All zones"
266, "Smoke"
267, "Auto detect"
268, "Fast Comp"
269, "OFF during reset"
270, "OFF when running on batteries"
271, "%02d - %02d/%02d/%02d %02d:%02d DET"
272, "%02d - %02d/%02d/%02d %02d:%02d MCP"
273, "P%03d:Z%s - %04d devices"
274, "%02d ALARM: %02d/%02d/%02d %02d:%02d d:%03d"
275, "P%03d:Z%s:%s"
276, "Autosetup in progress"
277, "Battery test in progress"
278, "Battery test completed"
279, "Battery test failed"
280, "Battery test OK"
281, "Changes to configuration"
282, "Select one option:"
283, "[Discard] new conf"
284, "[Save] in new conf"
285, "[Apply] after saving new conf"
286, "[Exit] Don't save in new conf"
287, "%02d P:%03d  %02d/%02d/%02d %02d:%02d"
288, "%02d FAULT P:%03d %02d/%02d/%02d %02d:%02d"
289, "Low battery"
290, "Dev %01d.%03d%s %s OK"
291, "Dev %01d.%03d%s %s Comm. Fault"
292, "Dev %01d.%03d%s %s Dirty"
293, "Dev %01d.%03d%s %s Double answr"
294, "Dev %01d.%03d%s %s Fault %02d"
295, "Dev %01d.%03d%s %s Wrong type"
296, "Fire protection disabled"
297, "Dev %01d.%03d%s %s Open circuit"
298, "Dev %01d.%03d%s %s Power supply"
299, "Dev %01d.%03d%s %s Short circ"
300, "Dev %01d.%03d%s: New device"
301, "Earth isolation fault"
302, "Earth isolation OK"
303, "%s OK"
304, "Fire protection enabled"
305, "%s open circuit"
306, "%s short circuit"
307, "%s open lines (+) and (-)"
308, "%s open line (-)"
309, "%s open line (+)"
310, "%s short sides A and B"
311, "%s short side A"
312, "%s short side B"
313, "Mains fault"
314, "Mains OK"
315, "Firenet open loop"
316, "Firenet not detected"
317, "Panel ID P%03d offline"
318, "Firenet loop OK"
319, "Firenet loops exceeded"
320, "Panel ID P%03d online"
321, "Panel ID P%03d detected"
322, "About to shutdown"
323, "Shutdown aborted"
324, "%s short circuit"
325, "%s 24V fault"
326, "%s OK"
327, "%s open circuit"
328, "Battery fault"
329, "Battery OK"
330, "Battery disconnected"
331, "Battery short circuit"
332, "Battery charger OK"
333, "Battery High Resistance FLT"
334, "Battery High Resistance OK"
335, "Battery charger: sensor HI"
336, "Battery charger: sensor LO"
337, "Battery charger overvoltage"
338, "Battery charger undervoltage"
339, "%s: Subsystem fault"
340, "Choose fault notification:"
341, "Operation completed"
342, "Operation failed"
343, "Operation in progress"
344, "Panel ID setup"
345, "Enter password:"
346, "Visible indicators ON ..."
347, "Opening config session ..."
348, "Buzzer ON ..."
349, "Raw data from dev %01d.%03d%s"
350, "Analogue value: %03d"
351, "Type check: %1X"
352, "CRC: %1X"
353, "Error:"
354, "Detector in alarm"
355, "MCP in alarm"
356, "Battery charged"
357, "Battery charging %02d %"
358, "Fire protection delay disabled"
359, "Fire protection delay enabled"
360, "Panel silenced"
361, "Day mode"
362, "Night mode"
363, "Fire routing delay disabled"
364, "Fire routing delay enabled"
365, "Sounders delay disabled"
366, "Sounders delay enabled"
367, "Z%s%s Alarm"
368, "Z%s%s Test alarm"
369, "Dev %01d.%03d%s: Disabled"
370, "Dev %01d.%03d%s: Enabled"
371, "Dev %01d.%03d%s: Alarm"
372, "Dev %01d.%03d%s: Active 2"
373, "Dev %01d.%03d%s: Normal"
374, "Dev %01d.%03d%s: Active"
375, "Dev %01d.%03d%s: Pre-alarm"
376, "Dev %01d.%03d%s: Active 1"
377, "Disable finished"
378, "Fire protection OFF"
379, "Z%s"
380, "No faults"
381, "Fire protection delayed"
382, "Fire routing delayed"
383, "Fire routing ON"
384, "Fire routing disabled"
385, "Fire routing enabled"
386, "Fire routing fault"
387, "Fire routing OFF"
388, "%s disabled"
389, "%s enabled"
390, "Fire protection ON"
391, "%s deactivated"
392, "%s activated L1"
393, "Dev %01d.%03d%s: In test"
394, "Dev %01d.%03d%s: Out of test"
395, "Loop %01d disabled"
396, "%s enabled"
397, "Z%s%s Alarm MCP"
398, "Z%s%s Test alarm MCP"
399, "%s disabled"
400, "%s enabled"
401, "%s not detected"
402, "%s deactivated"
403, "%s activated"
404, "Battery test failed"
405, "Battery test OK"
406, "Fire protection fault"
407, "Reset"
408, "Sounders fault"
409, "Sounders disabled"
410, "Sounders enabled"
411, "Sounders delayed"
412, "Sounders ON"
413, "Sounders silenced"
414, "System started"
415, "Test finished"
416, "Fire routing acknowledge fault"
417, "Event log backup OK"
418, "Event log cleared"
419, "Zone %s disabled"
420, "Zone %s enabled"
421, "Zone %s in test"
422, "Zone %s test finished"
423, "Sounders OFF"
424, "Select all loops"
425, "About to shutdown"
426, "Panel ID: %03d"
427, "Resetting, please wait"
428, "Re-sound sounders only"
429, "if new zone in alarm"
430, "Device ID search / create"
431, "Zone ID search / create"
432, "2X-F Fire System"
433, "Starting up ..."
434, "Battery charger compensation"
435, "Output group %03d  (%s) ON"
436, "Process remote faults"
437, "Global commands"
438, "Set delay for all zones:"
439, "Activate for all zones:"
440, "Dev %01d.%03d%s: External fault"
441, "%s: External fault"
442, "TEST ALARM: %02d/%02d/%02d %02d:%02d"
443, "Activate output:"
444, "KFP-AF Fire System"
445, "Startup from system fault"
446, "Firenet time sync"
447, "Set initial zone number to:"
448, "Use Firenet in class B:"
449, "Buzzer ON if:"
450, "Disable device LEDs flashing:"
451, "Last key pressed:"
452, "F1"
453, "F2"
454, "F3"
455, "F4"
456, "FIRE ROUTING START"
457, "FIRE ROUTING DELAY"
458, "SOUNDER DELAY"
459, "SOUNDER START/STOP"
460, "PANEL SILENCE"
461, "RESET"
462, "Dev %01d.%03d%s Manual release"
463, "Dev %01d.%03d%s In delay 2 release"
464, "Dev %01d.%03d%s Release sign ON"
465, "Dev %01d.%03d%s Release actuatorON"
466, "Dev %01d.%03d%s Release sign short"
467, "Dev %01d.%03d%s Release sign open"
468, "Dev %01d.%03d%s In delay out short"
469, "Dev %01d.%03d%s In delay out open"
470, "Dev %01d.%03d%s Actuator out short"
471, "Dev %01d.%03d%s Actuator out open"
472, "Dev %01d.%03d%s Pressure swit open"
473, "Dev %01d.%03d: Start MCP out short"
474, "Dev %01d.%03d%s Start MCP out open"
475, "Dev %01d.%03d%s Stopped manually"
476, "Dev %01d.%03d%s Stop MCP out open"
477, "NL: Dutch"
478, "FR: French"
479, "EN: English"
480, "DE: German"
481, "SV: Swedish"
482, "ES: Spanish"
483, "PT: Portuguese"
484, "IT: Italian"
485, "DA: Danish"
486, "NO: Norwegian"
487, "FI: Finnish"
488, "NL-B: Belgian Dutch"
489, "FR-B: Belgian French"
490, "CA: Catalan"
491, "IS: Icelandic"
492, "EN54"
493, "EN54 evacuation"
494, "Belgian NBNS21-100"
495, "Dutch NEN2535/2575"
496, "SST Transmission Path Fault"
497, "%04d P%03d %s %02d/%02d/%02d %02d:%02d"
498, "%s: Firmware updated"
499, "%s: Firmware update failed"
500, "Config session closed"
501, "Error closing config session"
502, "Configuration exported"
503, "Error exporting configuration"
504, "Report generated"
505, "Error generating report"
506, "Config session opened"
507, "Error opening config session"
508, "Firenet unavailable"
509, "Panel connected to network"
510, "External Connection opened"
511, "External Connection closed"
512, "New date/time: %02d/%02d/%02d %02d:%02d"
513, "Regional mode"
514, "Config backup loaded"
515, "Error loading config backup"
516, "Event log full"
517, "Date and time not set"
518, "Started from system fault"
519, "Fault in zone %s"
520, "Date format is DD/MM/YY"
521, "Current values applied"
522, "EL: Greek"
523, "AR: Arabic"
524, "PL: Polish"
525, "TR: Turkish"
526, "CS: Czech"
527, "HU: Hungarian"
528, "SK: Slovak"
529, "RU: Russian"
530, "LT: Lithuanian"
531, "ET: Estonian"
532, "LV: Latvian"
533, "BG: Bulgarian"
534, "SR: Serbian"
535, "RO: Romanian"
536, "HR: Croatian"
537, "HE: Hebrew"
538, "MK: Macedonian"
539, "SL: Slovene"
540, "Remote panel in Alarm"
541, "Remote panel in Fault"
542, "Remote panel in Test"
543, "Remote panel in Disable"
544, "%s fault"
545, "Fire routing acknowledged"
546, "%s: Overload"
547, "%s: Memory fault"
548, "%s: File system fault"
549, "%s: Comm. fault"
550, "%s: Not present"
551, "Dev %01d.%03d: Fault"
552, "Output group %03d disabled"
553, "Output group %03d enabled"
554, "%s in test"
555, "%s out of test"
556, "Invalid configuration file"
557, "Invalid language file"
558, "Zone %s in alert"
559, "USB device removed"
560, "Completed"
561, "Not implemented"
562, "Select new device type"
563, "USB device removed"
564, "%s Comm. Fault"
565, "Fire prot. acknowledge fault"
566, "P%03d:Z%s"
567, "%02d ALARM: %02d/%02d/%02d %02d:%02d"
568, "Dev %01d.%03d%s %s self test"
569, "Dev %01d.%03d%s %s wrong data"
570, "Dev %01d.%03d%s %s analog value"
571, "Dev %01d.%03d%s %s initializing"
572, "Dev %01d.%03d%s %s sensitivity"
573, "Dev %01d.%03d%s %s tamper"
574, "Dev %01d.%03d%s %s battery"
575, "Dev %01d.%03d%s %s charger"
576, "Dev %01d.%03d%s %s tamp & batt"
577, "Dev %01d.%03d%s %s line ref"
578, "Dev %01d.%03d%s %s Head/Audio"
579, "Dev %01d.%03d%s %s door fault"
580, "Dev %01d.%03d%s: lock-off/disabled"
581, "Panel in Service Mode"
582, "Panel out of Service Mode "
583, "Dev %01d.%03d%s %s radio signal"
584, "Dev %01d.%03d%s %s radio noise"
585, "FIRE PROTECTION START"
586, "FIRE PROTECTION DELAY"
587, "ZP2-F Fire System"
588, "Activate school bells while"
589, "input is ON:"
590, "Disable delays on night mode:"
591, "Activate service mode:"
592, "Introduce new device address:"
593, "Assign first ZI led to zone:"
594, "Select user name:"
595, "%02d ALERT: %02d/%02d/%02d %02d:%02d"
596, "Z%s Alarm"
597, "Z%s Alarm MCP"
598, "Zone %s out of alert"
599, "Rule %02d active"
600, "User %s log in"
601, "User %s log out"
602, "Output group %03d  (%s) OFF"
603, "Z%s Test alarm"
604, "Z%s Test alarm MCP"
605, "Fire Protection acknowledged"
606, "Fire Routing into test"
607, "Fire Protection into test"
608, "Sounders into test"
609, "Set secure access mode:"
610, "Are you sure?"
611, "Dev %01d.%03d%s: In auto mode"
612, "Dev %01d.%03d%s: In manual mode"
613, "Fire Routing out of test"
614, "Fire Protection out of test"
615, "Sounders out of test"
616, "New configuration applied"
617, "Dev %01d.%03d%s %s no battery"
618, "Output group %03d in test"
619, "Output group %03d out of test"
620, "Do you want to set a"
621, "warning tone during delay?"
622, "To proceed with the firmware"
623, "update process, fit JP4 in"
624, "the main board and press"
625, "Reboot"
626, " "
627, " "
628, "Step %d of %d"
629, "Sounders basic config"
630, "Select a common delay for"
631, "all sounder groups and the"
632, "option to have warning tone"
633, " "
634, "Set the date and time"
635, "of the control panel"
636, " "
637, " "
638, " "
639, "Adjust system sensitivity"
640, "periods with the weekly"
641, "day/night calendar"
642, " "
643, " "
644, "Set the regional mode"
645, "for the control panel."
646, "(Use evacuation for manual"
647, "activation of sounders)"
648, " "
649, "Activate the network board"
650, "by setting NB to YES in"
651, "expansion modules"
652, " "
653, " "
654, "Configure the control panel"
655, "node number:"
656, "Panel ID number must be"
657, "between 1 and 32"
658, " "
659, "Select the network nodes:"
660, "Activate the panel IDs that"
661, "will communicate to this"
662, "control panel"
663, " "
664, "Configure the network mode:"
665, "* NETWORKED, to share zones"
666, "* REPEATER, will additionally"
667, "repeate some nodes"
668, " "
669, "If REPEATER mode configured,"
670, "select the other nodes this"
671, "control panel will repeat"
672, " "
673, " "
674, "Select Global controls for"
675, "the control panel to send"
676, "commands to all the nodes"
677, "in its network."
678, " "
679, "Execute Autosetup to detect"
680, "all the loop devices connected"
681, "to the control panel"
682, " "
683, " "
684, "Modify the initiating devices"
685, "default settings: assign text,"
686, "zone, set operation mode or"
687, "sensitivity, "
688, " "
689, "Configure output groups:"
690, "Create the different groups of"
691, "outputs that will activate at"
692, "the same time by type"
693, " "
694, "Assign outputs to groups:"
695, "Loop output devices"
696, " "
697, " "
698, " "
699, "Assign outputs to groups:"
700, "Panel outputs"
701, " "
702, " "
703, " "
704, "Sounders advanced config"
705, "Configure delays to"
706, "activate Sounder groups"
707, " "
708, " "
709, "Configure delays to"
710, "activate Fire Routing groups"
711, " "
712, " "
713, " "
714, "Configure delays to"
715, "activate FireProtection groups"
716, " "
717, " "
718, " "
719, "Configure delays to"
720, "activate Program groups"
721, " "
722, " "
723, " "
724, "Configure the zones:"
725, "input zones text and any"
726, "alarm confirmation strategy"
727, " "
728, " "
729, "Configure panel inputs:"
730, "assign operation mode, text, "
731, " "
732, " "
733, " "
734, "Select the control panel"
735, "initial zone to configure"
736, "activations in the network"
737, " "
738, " "
739, "Current values NOT applied"
740, "Remote device"
741, "New config from CU"
742, "Previously saved config"
743, "Showing local status"
744, "CommErr  %2.4f"
745, "D%01d.%03d%s"
746, "%s: Pre-alarm"
747, "VdS2540"
748, "Test/disable timeout (min):"
749, "ERKUNDUNGZEIT"
750, "PROGRAMMABLE CONTROL 1"
751, "PROGRAMMABLE CONTROL 2"
752, "PROGRAMMABLE CONTROL 3"
753, "PROGRAMMABLE CONTROL 4"
754, "PROGRAMMABLE CONTROL 5"
755, "PROGRAMMABLE CONTROL 6"
756, "PROGRAMMABLE CONTROL 7"
757, "ALL PROGRAMMABLE CONTROLS"
758, "CONFIRM"
759, "%s: Eth. Fault"
760, "%s: PSTN Line1 Fault"
761, "UK: English"
762, "Buzzer disabled for alarms"
763, "Buzzer disabled for faults"
764, "External printer general fault"
765, "Internal printer comm. fault"
766, "Internal printer sensor fault"
767, "Internal printer paper fault"
768, "Internal printer temptr. fault"
769, "Internal printer voltage fault"
770, "SEVERAL ALARMS"
771, "Print "
772, "Print & Save"
773, "Save failed"
774, "Print failed"
775, "Save in progress"
776, "Print in progress"
777, "Save completed"
778, "Print completed"
779, "Heart Beat Configuration:"
780, "EXT %03d: Abort in StandBy"
781, "EXT %03d: Invalid door status"
782, "EXT %03d: Hold in StandBy"
783, "EXT %03d: Low gas pressure"
784, "EXT %03d: %s open circuit"
785, "EXT %03d: %s short circuit"
786, "EXT %03d: Activation disabled"
787, "EXT %03d: Extinguishing blocked"
788, "EXT %03d: Reset locked"
789, "EXT %03d: %s disabled"
790, "EXT %03d: %s in test"
791, "EXT %03d: %s ON"
792, "%s activated L2"
793, "between 1 and 250"
794, "%02d - %02d/%02d/%02d %02d:%02d"
795, "Dev %01d.%03d discovery group init"
796, "Dev %01d.%03d discovery SND init"
797, "CMS"
798, "Configuration integrity fault"
799, "%02d %s tamper"
800, "%02d %s door unlocked"
801, "%02d %s intrusion"
802, "%02d %s door opened"
803, "%02d %s extinguishing"
804, "%02d %s disabled"
805, "%02d %s extinguishing fault"
806, "%02d %s comm. fault"
807, "%s: PSTN Line2 Fault"
808, "Dev %01d.%03d isolate"
809, "Dev %01d.%03d aux. level"
810, "Dev %01d.%03d flow/filter fault"
811, "Dev %01d.%03d isolator fault"
812, "Alarms in standard format"
813, "%s: Low power voltage"
814, "%s: High power voltage"
815, "DACT disabled"
816, "EXT %03d: PreActivated"
817, "EXT %03d: Activated"
818, "EXT %03d: Released"
819, "EXT %03d: %s OFF"
820, "EXT %03d: %s out of test"
821, "EXT %03d: %s enabled"
822, "EXT %03d: Activation enabled"
823, "EXT %03d: Exting. not blocked"
824, "EXT %03d: Reset not locked"
825, "Invalid PIB variant"
826, "PAK Information"
827, "Device SN"
828, "Panel SN"
829, "Please plug the Panel"
830, "Activation Key to be"
831, "registered in the panel"
832, "and press Continue"
833, " "
834, "Panel Activation Key"
835, "not detected"
836, " "
837, " "
838, " "
839, "Registration failed!"
840, "PAK is used by another"
841, " Fire Panel or it is already"
842, "registered."
843, " "
844, "The Panel Activation Key"
845, "has been registered."
846, " "
847, " "
848, " "
849, "Please plug the Panel"
850, "Activation Key to be"
851, "unregistered in the USB Host"
852, "and press Continue"
853, " "
854, "The PAK could not"
855, "be unregistered. "
856, "PAK is not registered in the "
857, "Fire Panel or the PAK panel"
858, " serial does not match"
859, "The Panel Activation Key "
860, "has been unregistered."
861, " "
862, " "
863, " "
864, "Invalid Network Address"
865, "900 PAK required"
866, "RMOH PAK required"
867, "SELECT"
868, "DIAL PRESSED"
869, "PSU fault"
870, "Dev %01d.%03d%s isolator active"
871, "Vin1 low voltage"
872, "Vin2 low voltage"
873, "More Device alarms"
874, "Max number zones in test:"
875, "PSE communication fault"
876, "British Standard"
877, "Dev %01d.%03d in walk test"
878, "Dev %01d.%03d out of walk test"
879, "SOAK"
880, "Dev %01d.%03d in volume adjustment"
881, "Dev %01d.%03d out of volume adj."
882, "Firmware update required"
883, "Dev %01d.%03d in SOAK test"
884, "SOAK Test out"
885, "Bacnet PAK required"
886, "Modbus PAK required"
887, "Number of global zones"
888, "Loop %01d: Fast comp. in progress"
889, "Loop %01d: Fast comp. terminated"
890, "Loop %01d Recovery activated"
891, "Loop %01d Recovery deactivated"
892, "Cancel opening config session"
893, "Loop 1: Fast comp. in progress"
894, "Loop 2: Fast comp. in progress"
895, "Loop 3: Fast comp. in progress"
896, "Loop 4: Fast comp. in progress"
897, "Loop 1: Fast comp. ended"
898, "Loop 2: Fast comp. ended"
899, "Loop 3: Fast comp. ended"
900, "Loop 4: Fast comp. ended"
901, "All Loops: Fast comp. in prog"
902, "All Loops: Fast comp. ended"
903, "Too many objects: ZONEALARMS"
904, "Too many objects: INPUTALARMS"
905, "Too many objects: FAULTS"
906, "Too many objects: CONDITIONS"
907, "System overload"
908, "Dev %01d.%03d%s: Test Pre-alarm"
909, "%s: Test Pre-alarm"
910, "Main menu"
911, "Field setup"
912, "Autosetup"
913, "Loop device config"
914, "Zone configuration"
915, "Panel I/O config"
916, "Panel inputs"
917, "Panel outputs"
918, "Panel setup"
919, "ID configuration"
920, "Date and time"
921, "Day/Night mode"
922, "Day/Night schedule"
923, "Regional options"
924, "Firenet"
925, "Firenet opmode"
926, "Repeater map"
927, "Communications"
928, "TCP/IP"
929, "Remove USB device"
930, "Other settings"
931, "24V Aux config"
932, "Fault notification"
933, "Re-sound sounders"
934, "Key-switch config"
935, "Load / save config"
936, "Load config"
937, "Save config"
938, "Reports"
939, "Event log"
940, "View all"
941, "Clear"
942, "Backup"
943, "Device status"
944, "All"
945, "Zone status"
946, "Attention required"
947, "Configuration"
948, "Zone mapping"
949, "I/O logic"
950, "Revision"
951, "Config revision"
952, "Firmware version"
953, "Contact details"
954, "Test"
955, "Zone test"
956, "Device test"
957, "Input test"
958, "Panel inputs"
959, "Loop inputs"
960, "Output test"
961, "Panel outputs"
962, "Loop outputs"
963, "Locate device"
964, "Diagnostics"
965, "Individual device"
966, "Loop test"
967, "UI test"
968, "Indicators test"
969, "Keyboard test"
970, "Battery test"
971, "Control"
972, "Disable / Enable"
973, "Zones"
974, "Devices"
975, "Panel outputs"
976, "Panel inputs"
977, "Loops"
978, "Fast compensation"
979, "Clear dev stats"
980, "Alarm counter"
981, "Password setup"
982, "Initial zone"
983, "Zone config"
984, "Activation config"
985, "Sounders"
986, "Fire routing"
987, "Program"
988, "Per zone"
989, "Loops class"
990, "Firenet map"
991, "Global controls"
992, "Class B"
993, "Buzzer"
994, "Device LEDs"
995, "Expansion boards"
996, "Serial numbers"
997, "Save reports"
998, "All"
999, "Current events"
1000, "Event log"
1001, "Device status"
1002, "Attention required"
1003, "Zone status"
1004, "Default config"
1005, "Output groups"
1006, "Fire protection"
1007, "LCD test"
1008, "Output groups"
1009, "Area config"
1010, "Panel I/O status"
1011, "Output grps status"
1012, "Rules status"
1013, "Firenet status"
1014, "General delays"
1015, "Restore config"
1016, "Confirmations"
1017, "Output group test"
1018, "Locate device"
1019, "Event filter"
1020, "School bells"
1021, "Day/Night setup"
1022, "E-mail server"
1023, "E-mail accounts"
1024, "Service mode"
1025, "Power supply"
1026, "Address device"
1027, "ZI initial zone"
1028, "Holidays calendar"
1029, "Load aux files"
1030, "Languages"
1031, "Language fonts"
1032, "Splash screens"
1033, "Remote disable"
1034, "Remote test"
1035, "Outputs current"
1036, "Group config"
1037, "Command filter"
1038, "Loop values"
1039, "Change password"
1040, "Manage users"
1041, "Secure access"
1042, "System update"
1043, "Progr controls"
1044, "General config"
1045, "Self-test config"
1046, "Printer config"
1047, "Int printer config"
1048, "Ext printer config"
1049, "Pulse Activation"
1050, "Save/Print reports"
1051, "PSTN Config"
1052, "DACT Config"
1053, "Ethernet Config"
1054, "GPRS Config"
1055, "CMS Config"
1056, "PIB Devices"
1057, "VdS settings"
1058, "DACT test"
1059, "Terminal config"
1060, "Panel Activ. Key"
1061, "Register new PAK"
1062, "PAK list"
1063, "Unregister PAK"
1064, "More Alarms config"
1065, "Devices by type"
1066, "SNTP Server"
1067, "Auto date and time"
1068, "Ext. power supply"
1069, "Snd Vol Walk Confg"
1070, "Max Transceiv dly"
1071, "BMS Config"
1072, "Discovery e2prom"
1073, "Det Dirty warning"
1074, "Sounders walk test"
1075, "Test/Disable t_out"
1076, "Site Config"
1077, "Search device"
1078, "Search zone"
1079, "Select type"
1080, "Alarms"
1081, "Faults"
1082, "Conditions"
1083, "Events"
1084, "Config update"
1085, "Support info"
1086, "Alerts"
1087, "Sounders config"
1088, "Panel config"
1089, "Firenet config"
1090, "Setup"
1091, "Available options"
1092, "FR in T%01d %02d:%02d"
1093, "COM"
1094, "DIRTY"
1095, "DBL_A"
1096, "FAULT"
1097, "WRG_T"
1098, "DTECT"
1099, "OC"
1100, "PSU"
1101, "SC"
1102, "N_EXP"
1103, "ACT"
1104, "ACT2"
1105, "PREAL"
1106, "ACT1"
1107, "HD"
1108, "ID"
1109, "OD"
1110, "OHD"
1111, "DIS"
1112, "ENB"
1113, "FAULT"
1114, "TEST"
1115, "PEND"
1116, "SD"
1117, "IN_1"
1118, "IN_2"
1119, "1I"
1120, "D/N_M"
1121, "T_Alu"
1122, "MCP"
1123, "RST"
1124, "DET"
1125, "ACT1"
1126, "ACT2"
1127, "OFF"
1128, "N_FND"
1129, "LG"
1130, "1I1O"
1131, "STCHG"
1132, "LOOP1"
1133, "LOOP2"
1134, "LOOP3"
1135, "LOOP4"
1136, "OUT1"
1137, "OUT2"
1138, "OUT3"
1139, "OUT4"
1140, "FLT_O"
1141, "ALM_O"
1142, "REL1"
1143, "REL2"
1144, "REL3"
1145, "REL4"
1146, "REL5"
1147, "REL6"
1148, "REL7"
1149, "REL8"
1150, "OUT5"
1151, "OUT6"
1152, "OUT7"
1153, "OUT8"
1154, "AUX"
1155, "1O"
1156, "FAULT"
1157, "ALARM"
1158, "SDM"
1159, "LC1"
1160, "LC2"
1161, "LC3"
1162, "LC4"
1163, "MCU"
1164, "NB"
1165, "UIC"
1166, "ZIC"
1167, "1SO"
1168, "1ZM"
1169, "ALERT"
1170, "C_ALM"
1171, "ALARM"
1172, "NML"
1173, "NO"
1174, "YES"
1175, "OPERT"
1176, "MAINT"
1177, "INSTL"
1178, "P%03d"
1179, "FLT"
1180, "ONLN"
1181, "OFFL"
1182, "REPT"
1183, "A"
1184, "B"
1185, "LB"
1186, "ZI"
1187, "NB"
1188, "4I4O"
1189, "2I2O"
1190, "2I1O"
1191, "4I"
1192, "O1"
1193, "O2"
1194, "O3"
1195, "O4"
1196, "I1"
1197, "I2"
1198, "I3"
1199, "I4"
1200, "UKSB"
1201, "RB"
1202, "FOS"
1203, "FRAK1"
1204, "FRAK2"
1205, "FBFSD"
1206, "sD(A)"
1207, "aDsZ"
1208, "dDsZ"
1209, "aDMsZ"
1210, "aIMsZ"
1211, "dMsZ"
1212, "sD(B)"
1213, "aDaZ"
1214, "dDaZ"
1215, "aDMaZ"
1216, "aIMaZ"
1217, "dMaZ"
1218, "COND"
1219, "MAX_ACK_T"
1220, "FREXT_ACK"
1221, "FREXT_SND"
1222, "DEVICE"
1223, "ZONE"
1224, "PANEL"
1225, "ALWAYS"
1226, "FPAK1"
1227, "FPAK2"
1228, "DELAY"
1229, "SILEN"
1230, "ON"
1231, "MCPa"
1232, "MCPw"
1233, "MCPex"
1234, "IDex"
1235, "OHDm"
1236, "OHDw"
1237, "ODhs"
1238, "ODw"
1239, "HDa"
1240, "HD3"
1241, "HDw"
1242, "HDex"
1243, "4ZM"
1244, "1ZMex"
1245, "SDt2"
1246, "LED"
1247, "2O"
1248, "2SO"
1249, "1Isp"
1250, "1Ifir"
1251, "1Ibar"
1252, "1Ictr"
1253, "1InL"
1254, "1IsL"
1255, "1IsnL"
1256, "1SIex"
1257, "1Iw"
1258, "1I1Ow"
1259, "SDw"
1260, "RLM"
1261, "DT_AL"
1262, "ALL"
1263, "DAY"
1264, "NIGHT"
1265, "EVAC"
1266, "WRN"
1267, "TEST"
1268, "UKSB"
1269, "T_AL"
1270, "FP_FT"
1271, "DIS_D"
1272, "DIS_N"
1273, "GROUP"
1274, "EXTIN"
1275, "BS"
1276, "REMT"
1277, "BD%01d.%01d"
1278, "EXTRN"
1279, "SELFT"
1280, "WRG_D"
1281, "WRG_A"
1282, "INIT"
1283, "SENSI"
1284, "TAMP"
1285, "BATT"
1286, "CHRGE"
1287, "BT_TP"
1288, "LREF"
1289, "R_COM"
1290, "R_SIG"
1291, "R_SNR"
1292, "PRESW"
1293, "DOOR"
1294, "DEL_O"
1295, "DEL_S"
1296, "GAS_O"
1297, "GAS_S"
1298, "SIG_O"
1299, "SIG_S"
1300, "OFMCP"
1301, "ONMCP"
1302, "DACT"
1303, "PB_I1"
1304, "PB_I2"
1305, "PB_I3"
1306, "PB_I4"
1307, "PB_I5"
1308, "PB_I6"
1309, "PB_I7"
1310, "PB_I8"
1311, "PB_O1"
1312, "PB_O2"
1313, "PB_O3"
1314, "PB_O4"
1315, "PB_O5"
1316, "PB_O6"
1317, "PB_O7"
1318, "PB_O8"
1319, "PB_R1"
1320, "PB_R2"
1321, "PB_R3"
1322, "PB_R4"
1323, "PB_HT"
1324, "FREXT_VDS"
1325, "PIB"
1326, "MHA"
1327, "FSE"
1328, "MSP"
1329, "GIB"
1330, "MCPs"
1331, "MCPxG"
1332, "MPSMx"
1333, "PSMx"
1334, "MCPx"
1335, "MCPdG"
1336, "MCPd"
1337, "ODs"
1338, "ODx"
1339, "BDx"
1340, "FDx"
1341, "ODdG"
1342, "ODd"
1343, "OHDx"
1344, "OHDd"
1345, "IDs"
1346, "IDxG"
1347, "IDx"
1348, "IDdG"
1349, "IDd"
1350, "MOSTd"
1351, "CODd"
1352, "COHDd"
1353, "COPDd"
1354, "COEDd"
1355, "HDs"
1356, "HDxG"
1357, "HDx"
1358, "HDdG"
1359, "HDd"
1360, "HDHx"
1361, "SDs"
1362, "SDxG"
1363, "SDx"
1364, "SCCx"
1365, "SDdG"
1366, "SDd"
1367, "SDBd"
1368, "SDVBd"
1369, "SDVd"
1370, "IOs"
1371, "IOx"
1372, "MSMx"
1373, "SMx"
1374, "SMIOx"
1375, "IOdG"
1376, "IOd"
1377, "ZMs"
1378, "ZMxG"
1379, "ZMx"
1380, "ADx"
1381, "ZMdG"
1382, "ZMd"
1383, "ADd"
1384, "SIMx"
1385, "3I3O"
1386, "MIXED"
1387, "MANUAL"
1388, "AUTO"
1389, "SDms"
1390, "B1"
1391, "B2"
1392, "B3"
1393, "B4"
1394, "B5"
1395, "P"
1396, "ETH"
1397, "GPRS"
1398, "IFAM"
1399, "FSD"
1400, "UE"
1401, "SST"
1402, "EMZ"
1403, "B_EN54-13"
1404, "AP"
1405, "FULL"
1406, "8I"
1407, "8O"
1408, "8I8O"
1409, "KEYSW"
1410, "STA_AB"
1411, "AV1_AB"
1412, "AV2_AB"
1413, "GRP_AB"
1414, "STA_A"
1415, "AV1_A"
1416, "AV2_A"
1417, "GRP_A"
1418, "STA_B"
1419, "AV1_B"
1420, "AV2_B"
1421, "GRP_B"
1422, "REPORT"
1423, "MODBUS"
1424, "BACNET"
1425, "ZONEPOINT"
1426, "ADJ"
1427, "A"
1428, "F"
1429, "C"
1430, "AF"
1431, "AC"
1432, "AFC"
1433, "FC"
1434, "BKP"
1435, "CMS1"
1436, "CMS2"
1437, "CMS3"
1438, "CMS4"
1439, "CMS5"
1440, "CMS6"
1441, "CMS7"
1442, "ERM"
#F4CE806D3339C7928392A7E16DBE21BD78E20648